| |
Vertical Plastic Internal Mount
-
Compact Design
-
User configurable N/O or N/C operation
-
Reliable reed switch contacts
-
Available in PPS, Polypropylene and Nylon
-
WRAS approved
-
Many variants are UL recognised components file number E171218
The RSF50 series are compact vertically mounted devices with a single switch
point. Mounting is in the top or bottom of the tank from the inside,
so requires access to the inside of the tank.
Typical applications include printing systems and chemical dosing equipment.
They are manufactured in a variety of materials, with a choice of gasket materials,
to suit most commonly used liquids.
|
Variable Insertion Depth Float Switches
-
Insertion depth 150mm-1350mm
-
Easy to install
-
Adjustable level
-
N/O and N/C versions available
The RSF64EXS is a vertical float switch, with either normally open or normally closed (when the
float is down) switching action, permanently coupled to a 300mm PVC tube.
This provides a float switch, whose overall depth can be varied between 150mm
and 450mm, by adjusting its position in a sliding clamp.
Further 306mm PVC extension tubes may be added, up to a maximum of three, to provide insertion depths up to 1350mm.
|
Extension tubes for vertical plastic switches
-
Extend the reach of vertical switches
-
Available in 250, 500 & 750mm lengths
-
Polypropylene tube
-
M12 or M16 thread options
A range of extension tubes available in Polypropylene, which extend the reach of the various vertical float switches.
Polypropylene tubes, with either M12 or M16 threads, are intended for use with our plastic types of float switches and are available in 250mm, 500mm and 750mm lengths.
Stainless steel tubes with M16 threads can also be used with the PPS RSF60 series.
|
Low Level/Fast Lift
-
Operate in 10mm
-
Low SG 0.45 min
-
50mm & 200mm lengths
-
N/O & N/C types
The LLF switches are designed for applications where very low levels of liquid need to be detected.
The float will lift in as little as 6mm liquid and in SG as low as 0.45
|
External mount miniature vertical
-
External mount via compression seal
-
Compact design with small diameter float
-
Available with Nylon or Polypropylene material
-
25W or 100W switching capacity
The RSF100 series are miniature vertical float switches that can be fitted from the outside of a tank, via a compression seal, so do not require access to the inside of the tank for fitting.
The small diameter float (21.5mm) means that this switch can be used in applications where there is very little space.
|