Products
SOL Series
2-Port Solenoid Valves
- For liquid or gas use
- Full range of sizes from 3/8" to 2" (BSP)
- 2 port, normally open (NO) and normally closed (NC) versions
- 24Vdc, 110Vac and 230Vac operations available
- Brass body
LLF50 & 60 series
Low Level Fast Lift Float Switch
- Operate in 10mm
- Low SG 0.45 min
- 50mm & 200mm lengths
- N/O & N/C types
LFS Series
Paddle flow switch in SS for G1" to G3" pipe
- Stainless steel SS 304 paddle
- G3/4" or 1"NPT mounting plug thread
- Aluminium alloy housing or DIN 43650 plug
- Maximum operating pressure 20 bar
- Operating pressure up to 150 Degrees C (H versions)
Little EX Series
EX Float Switch for Tanks
- ATEX II 1 G Ex ia IIC T6
- Use in industrial waste water
- 5, 10 or 20 metre cable options
- C/O switch action
LLF70 Series
Compact, External Fitting, Low Level, Low S.G. Float Switch
- Suitable for low specific gravity liquids (0.7 S.G.)
- Very low level sensing
- Flying lead or M12 plug connection
- Available in Nylon, Polypropylene, PPS & PVDF
- Many variants have WRAS and /or UL approval
LLF40 Series
Compact Internal Fitting, Low Level, Low S.G. Float Switch
- Suitable for low specific gravity liquids (0.7 S.G.)
- Very low level sensing
- Class leading compact design
- Available in Nylon, Polypropylene, PPS or PVDF
- 25VA & 100VA versions
- Many variants have WRAS and/or UL approval
- Flying Lead or M12 plug connection
FFSMC Series
Float Switch for Exposed Tanks or Turbulent Liquid
- Use in sewer and industrial waste water
- Unaffected by suspended solids
- Operates in turbulent fluids
- WRAS approved versions available (see FFSMC WRAS)
FFSMC WRAS Series
WRAS Approved Float Switch for Exposed Tanks or Turbulent Liquid
- Use in sewer and industrial waste water
- Unaffected by suspended solids
- Operates in turbulent fluids
- WRAS approved
LC Series
Cable Sets with M12 Connection
- 4 pole M12 connector to IEC 61076-2-101
- IP67 protection IEC 60529 (a3)
- Anti-vibration system
- Choice of PVC or PUR/PVC cable insulation
MS Series
High Power Float Switch for Indoor or Covered Tanks
- Direct switching of 10 or 20A
- Use in non-turbulent fluids
- 100m depth capability
- Cable mounting
MS-WRAS Series
High Power WRAS approved Float Switch for Indoor/Covered Tanks
- WRAS approved for use in drinking water
- Direct switching of up to 10A or 20A resistive
- Use in non-turbulent fluids
- Use in depth up to 100 metres
MC Series
High Temperature Cable End Float Switch
- Up to 130 Degrees C operation
- Cable Mounted
- Polyurethane or Silicone Cable
- Supplied with Counterweight